The xenon lamp works in a state of ultra-high pressure. In addition, the surface temperature of the bubble shell of the lamp can reach 800℃. Therefore, the air volume inside the movie machine must meet the wind speed required by the xenon lamp, which can reduce the chance of frying the lamp, slow down the blackening of the lamp, and extend the life of the lamp.

The high-pressure xenon lamp damage is one of the reasons why the wires of a xenon lamp burn out, this in addition to the manufacturers in order to strengthen the lead of lamp technology, using installation, because the power cable and pipe cap not tighten, causing poor contact, increased contact resistance, high in the large current generated by the point of joule heat (Q = I2R) to produce hot, make contact point further increases in contact resistance, heat increases further, a vicious cycle to produce high heat burning lamp holder (lead) in the end.

Xenon lamp in the use of a period of time if there is a phenomenon of fluttering arc (transverse lighting), after turning off the lamp can turn the lamp 180°, can overcome the above phenomenon of fluttering arc, extend the service life of the lamp.

Xenon gas is used in car lights

It is suggested that the new lamp can work at 70% ~ 80% of the rated current when it is in use, and then gradually increase the working current according to the need (not exceed the specified maximum value), so as to extend the service life of the lamp.

For lighting power supply, its current pulsation coefficient must be less than 3.5%, and the smaller the better, and also need to ensure that the impulse current when the lamp starts the moment to be small, otherwise it will damage the lamp's electrode greatly, shorten the lamp's service life.

After the lamp uses the specified service life, should replace the lamp tube in time. When the bulb shell of the lamp is found to be seriously black in the process of use, the lamp should be changed, otherwise it will cause the temperature of the bulb shell to be too high, easy to fry.

Wuhan Newread Special Gas Co., LTD. Main products include original imported helium, sulfur hexafluoride, standard gas, xenon gas, high-purity silane, ultra-pure ammonia, hydrogen chloride, carbon tetrafluoride, laser mixture, electric light source mixture and other high-purity gas products, with strong competitive strength.